Temperature Sensing Components in Sandton: Find Sensors and Modules Locally
Discover temperature sensing components for student, industrial, and maker projects in Sandton. Stock includes thermistors, LM35/DS18B20, RTDs, and more, with easy local access.

Wide Sensor Selection
From thermocouples to digital probes and ICs, all in one place.
Local Stock & Branch Pickup
Check Sandton-area stock and collect at your nearest Communica branch.
Expert Selection Tips
Get advice on sensor types, wiring, and common South African use cases.
Overview: Temperature Sensing for SA Projects
Accurate temperature measurement is essential for projects ranging from environmental monitoring and HVAC control to industrial automation. In the Sandton and greater Johannesburg area, makers, students, and engineers need dependable temperature sensing components that are available locally, backed by technical support and practical advice.
Popular types of temperature sensing components include:
- Analogue thermistors (NTC/PTC)
- Semiconductor sensors (e.g., LM35, DS18B20, TMP36)
- Digital temperature & humidity sensors (e.g., DHT22, SHT31)
- Thermocouples and RTD probes
- MEMS temperature ICs (i.e., I2C/SPI)
Communica stocks a comprehensive range of temperature sensors for South African conditions, including leading brands such as Adafruit, Amphenol, and Sensirion. Understanding key characteristics and local considerations helps ensure you choose the right component for your build.
Sensor Standards & Specifications
Temperature sensors differ widely in principle, output format, and precision. Selection involves understanding:
- Operating range: -55 degreesC to +150 degreesC common, but check datasheets.
- Accuracy: Varies from 0.1 degreesC (digital) to 2 degreesC (low-cost thermistors).
- Signal type: Analogue voltage, resistance, I2C, OneWire, digital output.
- Size & packaging: Probe, SMD, TO-92, or ready-made breakout boards.
- Humidity resilience: For environments with condensation, robust encapsulated or IP-rated parts may be required.
Below is a comparison of common sensor types stocked locally:
| Type | Typical Accuracy | Signal | Example Models |
|---|---|---|---|
| NTC Thermistor | 1-2 degreesC | Resistance (Analogue) | 10kOhm, EPCOS B57560, Amphenol |
| Semiconductor IC | 0.5 degreesC | Analogue Voltage | LM35, TMP36 |
| Digital Sensor | 0.1-0.5 degreesC | I2C, OneWire | DS18B20, SHT31 |
| Thermocouple | 2 degreesC (with proper reference) | mV (with amplifier) | K-type, MAX31855 module |
When building in Sandton, factor in typical environments - industrial, domestic, or outdoor - as this affects selection and mounting.
Related Sensors & Semiconductors Products
Discover quality sensors & semiconductors products related to Temperature Sensing Components in Sandton: Find Sensors and Modules Locally
Ema Ta1004 Programmable Temp Sensor Stainless Steel -40 - +150 Deg. C 4-20ma Output 1 Npn/pnp Output 2 - M18 X 1,5 External Thread Ip68
Ema Ta1004 Programmable Temp Sensor Stainless Steel -40 - +150 Deg. C 4-20ma Output 1 Npn/pnp Output 2 - M18 X 1,5 External Thread Ip68
Selection Criteria & Local Advice
Choosing the right temperature sensing component involves a mix of technical and practical considerations:
- Required accuracy and temperature range for your application
- Sensor response time (important for HVAC and control systems)
- Interface type - microcontroller GPIO, ADC, or digital bus
- Form factor for easy mounting (PCB, enclosure, probe)
- Availability and lead times in the Sandton region
Basic Calculations: Thermistor Example
For NTC thermistors, the resistance decreases as temperature rises. The Steinhart-Hart equation is commonly used:
1/T = A + Bln(R) + C(ln(R))^3
Where T = temperature (Kelvin), R = resistance (Ohm),
A, B, C = constants from the thermistor datasheet.
Example: For a 10kOhm NTC at 25 degreesC, with A = 0.001129, B = 0.000234, C = 0.000000087, you can estimate T by measuring R and solving numerically, or consult a conversion table.
Wiring Diagram: Digital OneWire Sensor (DS18B20)
VCC (3.3V/5V)
|
[Resistor ~4.7kOhm]
|
DATA -----> MCU GPIO
|
GND
Note: Always check the device pinout and voltage compatibility with your board (e.g., Arduino, ESP32, Raspberry Pi). Popular digital sensors like the DS18B20 can be daisy-chained on one wire for multi-point setups.
Troubleshooting & Typical Use Cases (SA Context)
- Sudden step changes: Check for unstable cabling or sensor placement near heat sources (e.g., sunny window).
- No data response: Confirm pull-up resistor and bus wiring, especially for OneWire and I2C modules.
- Drift over time: For industrial Sandton settings, select industrial-grade, encapsulated sensors to reduce ambient contamination effects.
- Lead time surprises: Before starting a bulk or capex project, verify availability at Communica and consult on alternatives if needed.
For tertiary labs, smart home builds, greenhouse monitoring, or commercial controls, Communica makes it simple to explore Sensors, shop by branded suppliers, and arrange local pickup.
Sources
Communica supplies semiconductors and electronic components to industries such as automotive, electrical, automation, mining, and education.
Disclaimer: This content is for educational purposes only. Product availability, pricing, and specifications are subject to change. Always verify current details on the retailer's website before making a purchase. We may earn affiliate commissions from qualifying purchases.
Frequently Asked Questions
Get answers to common questions about Sensors And Semiconductors
Why Choose Communica?
*Free Shipping
Free shipping for orders over ZAR 1,000.00.
7-Day Returns
Get a full refund if you had the product for less than 7 days.
Quick Delivery
Nationwide delivery within 2 - 4 working days.


