Sound, Buzzer & Microphone Components Supplier - Local Stock in South Africa
Buy buzzers, microphones and sound modules from a South African supplier with local stock, branch pickup, VAT invoices and procurement quotes.

Local stock & pickup
Reduce lead times with Samrand, Pretoria and Cape Town branch collection.
Wide audio range
Buzzers, electret and MEMS microphones, sound modules and accessories.
Procurement friendly
VAT invoices, quotes for institutions and account ordering available.
Why choose a local sound components supplier
Finding the right sound, buzzer and microphone components supplier can make or break a project timeline. Communica offers deep local stock of piezo buzzers, active buzzers, electret and MEMS microphones, sound modules and accessories so you can prototype fast, avoid long import delays, and invoice through campus or company accounts. We focus on availability, practical compatibility guidance, and accessories that get you from breadboard to product - fast.
Immediate benefits for South African makers and teams
- Local stock reduces lead times and freight unpredictability.
- Branch pickup options in Samrand, Pretoria CBD, and Cape Town for urgent projects.
- VAT invoices, quotes for procurement, and education discounts where applicable make purchasing straightforward.
What we stock - components and compatibility
We carry a broad selection of sound-related parts across categories so engineers and students can match form-factor, voltage, and interface requirements. Typical product groups include piezo discs, surface-mount buzzers, electret microphones, MEMS microphones, sounder modules with driver ICs, amplifier boards, and complete audio breakout kits. For a full browse, explore our collections page here.
Quick spec callouts to consider
When selecting a buzzer or microphone, check these key specs: operating voltage, current draw, sound pressure level (SPL), frequency range, mounting style, and whether the part is active (has built-in oscillator) or passive (requires drive signal). For microphones, sensitivity and signal-to-noise ratio (SNR) are important for signal quality in noisy environments.
| Component | Typical Voltage | Use Case |
|---|---|---|
| Active piezo buzzer | 3-12 V | Alerts, alarms, simple tones (no driver needed) |
| Passive piezo element | Driven by MCU PWM | Custom tones and melody playback |
| Electret microphone (analogue) | Bias 2-10 V | Speech and ambient sensing with preamp |
| MEMS microphone (digital/analog) | 1.8-3.3 V | Low-voltage IoT and embedded audio |
Spec comparisons at a glance
Component | Typical SPL | Typical Current | Mounting--------------------|-------------|-----------------|---------Mini active buzzer | 75-95 dB | 10-30 mA | PCB / panelSurface-mount MEMS | N/A | 0.2-1 mA | SMDElectret capsule | 55-70 dB | 0.5-2 mA (preamp)| through-hole
If you need help comparing parts, use our sound-buzzer-microphone-components-in-stock page to filter trusted manufacturers and popular maker brands stocked locally.
Accessory bundles and compatibility guidance
Common accessory bundles speed development: buzzer + resistor pack + header pins for passive buzzers; microphone + preamp board + shielded cable for better audio; breakout boards for MEMS microphones that adapt 1.8V or 3.3V systems. Communica stocks matching enclosures, connectors and mounting hardware so your audio module fits the final product without extra sourcing delays. Browse matched parts on our buy-sound-buzzer-microphone-components-south-africa index.
Compatibility checklist (before you buy)
- Confirm operating voltage matches your MCU or driver board.
- Check mounting footprint and hole positions for panel or PCB fit.
- Decide active vs passive based on whether your system can generate drive signals.
Related Sensors & Semiconductors Products
Discover quality sensors & semiconductors products related to Sound, Buzzer & Microphone Components Supplier - Local Stock in South Africa
Ø18mm Round Panel Buzzer • Plug-in • 12vdc • Intermittent Tone
Ø18mm Round Panel Buzzer • Plug-in • 12vdc • Intermittent Tone
Ø18mm Round Panel Buzzer • Plug-in • 12vdc • Continuous Tone
Ø18mm Round Panel Buzzer • Plug-in • 12vdc • Continuous Tone
Piezo Buzzer Ext-drv 3-30vp-p 4khz 85db
Piezo Buzzer Ext-drv 3-30vp-p 4khz 85db
18x24mm Rectangular Panel Buzzer • Flash Red Led • Plug-in • 24vdc • Intermittent Tone
18x24mm Rectangular Panel Buzzer • Flash Red Led • Plug-in • 24vdc • Intermittent Tone
18x18mm Square Panel Buzzer • Plug-in • 12vdc • Intermittent Tone
18x18mm Square Panel Buzzer • Plug-in • 12vdc • Intermittent Tone
18x18mm Square Panel Buzzer • Plug-in • 12vdc • Continuous Tone
18x18mm Square Panel Buzzer • Plug-in • 12vdc • Continuous Tone
Ultrasonic Transducer Sealed
Ultrasonic Transducer Sealed
Buzzer Piezo Round 12vdc 35ma 105db P/m Pcb
Buzzer Piezo Round 12vdc 35ma 105db P/m Pcb
Piezo Buzzer Fast Pulse Leaded 12vdc (ov=3-28vdc) 9ma 2,9khz 90db/30cm 41.8x16mm
Piezo Buzzer Fast Pulse Leaded 12vdc (ov=3-28vdc) 9ma 2,9khz 90db/30cm 41.8x16mm
Buzzer Panel 18x24mm Rectangular Plug-in 12v Intermittent Flash Led Red Ip40
Buzzer Panel 18x24mm Rectangular Plug-in 12v Intermittent Flash Led Red Ip40
Buzzer Round Pcb 5vdc (ov=3-8vdc) 1/2duty 40ma 85db/10cm 12x9mm P=6,5mm
Buzzer Round Pcb 5vdc (ov=3-8vdc) 1/2duty 40ma 85db/10cm 12x9mm P=6,5mm
Piezo Buzzer Ext-drv 3-30vp-p 4khz 75db Pcb
Piezo Buzzer Ext-drv 3-30vp-p 4khz 75db Pcb
Installation tips, wiring and quick calculations
Simple wiring for active buzzers is often just V+ and GND. Passive buzzers require a drive signal - typically a PWM output from a microcontroller. Use Ohm's law and basic power calculations to size series resistors or driver transistors when needed. Ohm's law: V = I * R. Power dissipation: P = V * I. For example, a 5 V drive supplying 20 mA through a buzzer needs a resistor value R = (Vdrive - Vbuzzer) / I and P = Vdrop * I to ensure the resistor's power rating is sufficient.
Wiring diagram examples (ASCII)
Simple active buzzer: MCU 5V ---+-----> +Buzzer | GND -----> -Buzzer / MCU GNDPassive buzzer with NPN driver: MCU PWM -->|1k|--B (NPN) Collector -----> Buzzer +V Emitter -----> GND
Troubleshooting common issues
No sound: check polarity, supply voltage and that the part is not passive when you expected active. Low volume: confirm SPL rating, reduce series resistance, or use an amplifier. Noise or hum on microphone inputs: use shielded cable and proper grounding; consider MEMS microphones for better immunity in compact designs.
Availability, lead times and local support
Communica operates nationally from Samrand with branches in Pretoria CBD and Cape Town, plus a sub-distributor network - helping reduce wait times for education labs and engineering teams. Check current local stock and branch collection times on our branches page here. For bulk orders or institutional procurement, request a formal quote and VAT invoice to streamline purchasing.
Why Communica for sound components
We combine breadth of stock with practical buying options: local pickup in Samrand, account quotes for procurement, and access to maker-friendly brands and technical accessories. Whether you are building an alarm circuit for a student project, outfitting a prototype with a compact MEMS microphone, or sourcing multiple buzzer types for product testing, our range and local presence cut project friction and lead time.
Common objections handled
- Concern: "Parts will arrive late from overseas." Response: local stock and branch pickup options reduce reliance on imports.
- Concern: "I need a VAT invoice or quote." Response: we offer account quotes and VAT-compliant invoices for education and procurement.
- Concern: "Which part suits my MCU voltage?" Response: product pages and our shop-by-brand listings help you filter by voltage and mounting.
Ready to compare parts or check stock? Use our Compare Specs tools and product pages on the homepage here to explore options and plan your purchase. Shop Now, Check Stock in Samrand, Compare Specs, or Request a Quote to keep your audio projects moving without delay.
Choose a supplier that understands South African lead times, education procurement needs and the practicalities of building sound-enabled devices. Communica’s stock, branches and procurement-ready processes are designed to help you finish projects on time and to spec.
Communica supplies semiconductors and electronic components to industries such as automotive, electrical, automation, mining, and education.
Disclaimer: This content is for educational purposes only. Product availability, pricing, and specifications are subject to change. Always verify current details on the retailer's website before making a purchase. We may earn affiliate commissions from qualifying purchases.
Frequently Asked Questions
Get answers to common questions about Sensors And Semiconductors
Why Choose Communica?
*Free Shipping
Free shipping for orders over ZAR 1,000.00.
7-Day Returns
Get a full refund if you had the product for less than 7 days.
Quick Delivery
Nationwide delivery within 2 - 4 working days.
























