Sound, Buzzer & Microphone Components for Sale in South Africa - Local Stock & Expert Support
Shop buzzers, electret & MEMS microphones, sound modules and accessories from local stock. Fast Samrand pickup, VAT invoices, technical support and procurement quotes.

Local Availability
In-stock audio components with branch pickup and VAT invoicing.
Technical Support
Specification guidance and accessory bundles for fast builds.
Procurement Ready
Account quotes, stock checks and Samrand warehouse collection.
Get the right audio components, quickly
Need buzzers, microphones or sound modules for a prototype, classroom project or production run? Communica stocks a broad range of audio components and development hardware so you can move from idea to build with minimal delays. We prioritise availability, clear specs and local support - ideal for South African makers, students and procurement teams who must manage lead times, VAT invoicing and branch collection.
Why choose local stock for audio components
- Immediate pickup from Samrand, Pretoria CBD or Cape Town to avoid long import waits.
- VAT invoices and account quotes available for education and business purchases.
- Hands-on selection advice and accessory bundles (microphone preamps, connector kits, enclosures).
Product ranges and common use cases
We stock piezo and magnetic buzzers, active/passive sounders, electret and MEMS microphones, audio amplifiers and complete sound modules suitable for alarm systems, IoT devices, robotics, voice detection and audio recording labs. Browse related categories to compare families and brands: Shop by Category, see the full catalogue at All Products, or explore brands we commonly stock at Shop by Brand.
Specification callouts to check before ordering
- Operating voltage and current (important for microcontroller-driven projects).
- Sensitivity and SNR for microphones (dB), and whether preamp is required.
- Sound pressure level (SPL) for buzzers/speakers and continuous vs. intermittent ratings.
- Physical mounting, connector type and compatibility with common headers.
Quick spec comparison table
| Item | Typical Voltage | SPL / Sensitivity | Use |
|---|---|---|---|
| Piezo buzzer (active) | 3-12V | 85-100 dB | Simple alarms, tone generator |
| Active magnetic buzzer | 5-12V | 80-95 dB | Low-profile audible alerts |
| Electret microphone | Requires bias ~2-10V | -44 to -36 dBV/Pa | Voice capture with preamp |
| MEMS microphone | 1.8-3.3V | -42 to -26 dBV/Pa | Low-power digital/analogue capture |
Compatibility and accessory bundles
Common compatibility notes: MEMS modules often match 3.3V microcontrollers directly, while electret capsules usually need a simple bias resistor and preamp (e.g., MAX9814 or LMV358) for clean audio. For convenience, look for accessory bundles that include breakout boards, connectors, and mounting hardware to speed assembly. If you need help selecting a bundle or matching specs to a controller, request a sound-buzzer-microphone-components-quote or compare specs through our site.
Local purchasing and stock checks
Check current availability and reserve stock for pickup: see branch locations and hours at Branches & Trading Hours. If you need rapid collection, select "Check Stock in Samrand" for up-to-date warehouse availability.
Related Sensors & Semiconductors Products
Discover quality sensors & semiconductors products related to Sound, Buzzer & Microphone Components for Sale in South Africa - Local Stock & Expert Support
Ø18mm Round Panel Buzzer • Plug-in • 12vdc • Intermittent Tone
Ø18mm Round Panel Buzzer • Plug-in • 12vdc • Intermittent Tone
Ø18mm Round Panel Buzzer • Plug-in • 12vdc • Continuous Tone
Ø18mm Round Panel Buzzer • Plug-in • 12vdc • Continuous Tone
Piezo Buzzer Ext-drv 3-30vp-p 4khz 85db
Piezo Buzzer Ext-drv 3-30vp-p 4khz 85db
18x24mm Rectangular Panel Buzzer • Flash Red Led • Plug-in • 24vdc • Intermittent Tone
18x24mm Rectangular Panel Buzzer • Flash Red Led • Plug-in • 24vdc • Intermittent Tone
18x18mm Square Panel Buzzer • Plug-in • 12vdc • Intermittent Tone
18x18mm Square Panel Buzzer • Plug-in • 12vdc • Intermittent Tone
18x18mm Square Panel Buzzer • Plug-in • 12vdc • Continuous Tone
18x18mm Square Panel Buzzer • Plug-in • 12vdc • Continuous Tone
Ultrasonic Transducer Sealed
Ultrasonic Transducer Sealed
Buzzer Piezo Round 12vdc 35ma 105db P/m Pcb
Buzzer Piezo Round 12vdc 35ma 105db P/m Pcb
Piezo Buzzer Fast Pulse Leaded 12vdc (ov=3-28vdc) 9ma 2,9khz 90db/30cm 41.8x16mm
Piezo Buzzer Fast Pulse Leaded 12vdc (ov=3-28vdc) 9ma 2,9khz 90db/30cm 41.8x16mm
Buzzer Panel 18x24mm Rectangular Plug-in 12v Intermittent Flash Led Red Ip40
Buzzer Panel 18x24mm Rectangular Plug-in 12v Intermittent Flash Led Red Ip40
Buzzer Round Pcb 5vdc (ov=3-8vdc) 1/2duty 40ma 85db/10cm 12x9mm P=6,5mm
Buzzer Round Pcb 5vdc (ov=3-8vdc) 1/2duty 40ma 85db/10cm 12x9mm P=6,5mm
Piezo Buzzer Ext-drv 3-30vp-p 4khz 75db Pcb
Piezo Buzzer Ext-drv 3-30vp-p 4khz 75db Pcb
Wiring, simple calculations and troubleshooting
Wiring basic buzzer and microphone circuits is straightforward. Use Ohm’s law to size series resistors for LEDs or to limit current where needed:
V = I × R R = V / I
Example: driving a 5V active buzzer from 3.3V MCU
If a buzzer requires 5V but you only have a 3.3V output, use a MOSFET switch or a simple transistor driver and supply the buzzer from 5V while the MCU controls the transistor gate/base. Typical wiring (N-channel MOSFET):
MCU GPIO ----|Gate
| MOSFET D---- Buzzer +5V
Ground ------------------------ Buzzer - to MOSFET S ---- GND
Troubleshooting checklist
- No sound: check supply voltage, ground continuity and polarity.
- Low volume: confirm SPL spec, verify correct driver or amplifier is used.
- Noise or hiss on microphone: ensure proper biasing and use shielded cable if long runs.
- Intermittent operation: inspect solder joints and connector seating, swap to known-good unit.
Example specification checklist for procurement
| Field | Example Requirement |
|---|---|
| Type | MEMS microphone, analogue output |
| Voltage | 3.3V ±5% |
| Sensitivity | -38 dBV/Pa ±2 dB |
| Connector | 3-pin header or solder pads |
| Lead time | In-stock for Samrand pickup or 3-7 days via branches |
Addressing common objections
Concerned about lead times? We maintain central warehouse stock in Samrand and branch inventories to keep typical lead times short; confirm availability on the product page or visit our in-stock listings. Need technical help before buying? Our team supports education and industry purchases and can suggest suitable brands and part numbers - learn more about our support.
Summary and next steps
For reliable local sourcing of buzzers, microphones and sound modules, Communica offers broad stock, clear specs and practical buying options including branch pickup, VAT invoices and account quotes for education and business buyers. Compare specs, reserve stock, or request a quote to get parts matched to your project - Shop Now, Check Stock in Samrand, Compare Specs or Request a Quote via our product pages to proceed with confidence.
Whether you are wiring a classroom demo, prototyping a sensor array or equipping a production run, our range and local service reduce risk and speed delivery. Start by exploring relevant categories or contacting our sales team for an application-specific recommendation.
Communica supplies semiconductors and electronic components to industries such as automotive, electrical, automation, mining, and education.
Disclaimer: This content is for educational purposes only. Product availability, pricing, and specifications are subject to change. Always verify current details on the retailer's website before making a purchase. We may earn affiliate commissions from qualifying purchases.
Frequently Asked Questions
Get answers to common questions about Sensors And Semiconductors
Why Choose Communica?
*Free Shipping
Free shipping for orders over ZAR 1,000.00.
7-Day Returns
Get a full refund if you had the product for less than 7 days.
Quick Delivery
Nationwide delivery within 2 - 4 working days.
























