8013PCB-SH Electronic Switches - Compact PCB Toggle & Slide Switches for Hobbyists & Industry

Why choose 8013PCB-SH switches for projects

These switches are valued for compactness, predictable mechanical action, and straightforward solder-in installation. They are commonly used for mode selection, power toggles, user controls on enclosures, and DIP-replacement options on custom boards. For South African makers and labs, key benefits are easy sourcing of compatible PC footprints, low-cost spares, and compatibility with common connector and cable accessories stocked by Communica.

Typical specifications to check

• Contact arrangement: SPST / SPDT / 2P versions
• Rated voltage/current: often in the range of 12V-125VAC or 24VDC and 0.1A-3A depending on type
• Mounting: through-hole PCB pins with standard pitch
• Actuator type: slide, toggle, or tactile
• Mechanical life: cycles (check datasheet for specific model)

Quick spec comparison

Note: always consult the specific datasheet for contact ratings and mechanical lifetime. If you need higher current, Communica carries larger toggle and rocker switches in matching form factors.

Compatibility & accessories

When integrating 8013pcb-sh electronic switches, consider headers, short PC tracks for jumpers, wire harnesses, and compatible enclosures. Communica stocks PCB headers, crimp housings, and small enclosures that accept standard PCB-mounted actuators. For panel mounting, confirm actuator clearance in your CAD model and consider using standoffs to protect switch bodies from flex.

Practical selection checklist

• Confirm contact arrangement (SPST vs SPDT) for your control logic.
• Sum the expected current loads and choose a switch rated above that value with headroom.
• Check mechanical travel and tactile feel for user interfaces in education or kiosks.
• Select solderable pin lengths to match your PCB thickness and any under-board connectors.

Example: wiring a simple power switch

For a single-pole power switch controlling a 12V LED strip, wire the positive rail through the switch: connect 12V supply to common (COM) and the LED positive to normally open (NO). Ground remains uninterrupted. ASCII wiring diagram:

  +12V ----[ COM ]----[ NO ]---- LED +
  GND --------------------------- LED -

If using the switch for signal-level logic (microcontroller inputs), ensure contact bounce is handled in firmware or with debounce hardware.

Stocking & purchasing guidance for South Africa

Communica serves hobbyists, tertiary labs, and procurement teams. For single items, check online stock and branch collection in Samrand or Pretoria CBD to avoid courier delays. For classroom sets or production quantities, request a quote to confirm lead time and VAT invoicing. Prices for small quantities are typically quoted in ZAR; bulk orders may qualify for better lead times depending on supplier availability.

Compare, buy, and support

Compare Specs: review current rating, contact type, and mechanical life across similar PCB switches. Shop Now for single items and starter kits, Check Stock in Samrand for collection, or Request a Quote for bulk classroom or production requirements. Communica can help match accessories such as headers, standoffs, and appropriate enclosures.

Sources

• Communica product collections and categories
• Electronics Notes - Switch types and basics
• SparkFun Learning - Switches and debouncing (practical guidance)
• Adafruit Learning System - Prototyping and switch integration